
India’s First E85 Car Found Three Buyers in Its First Month: An Analysis of the Supply-First Ethanol Gamble
E85 reached 48 pumps in June 2026, well ahead of any mandate forcing its use. The first car built for it went on sale at the same time and has found almost no buyers. Meanwhile, the E10 petrol that tens of millions of older engines need has quietly vanished.
E85 fuel reached the 48 pumps in June 2026, well ahead of any formal mandate forcing its use. The car built to consume it went on sales around same time, however, has found almost no buyers. Meanwhile, the fuel that tens of millions of older engines still need to run safely has quietly vanished, writes Ravi Damodaran
The government of India notified the use of 85% ethanol blend in petrol (E-85) and ethanol (E100) for vehicles and has officially launched it on 5 June 2026 at 48 retail outlets across India. Earlier, it had notified E20 petrol (petrol blended with 20% ethanol) launch along with BS6-II emissions legislations rollout on 1 April 2023 and achieved the target for a nationwide roll out of E20 fuel as the standard offering by 1 April 2025, ahead of its original target of 2030. Prior to this E10 was the standard fuel available across India since June 2022.
Ethanol has a lower calorific value of 26.8 MJ/kg compared to 45.8 MJ/kg for petrol; which means a E100 fuel will result in a 42% loss in power or increase in fuel consumption. An E20 fuel would be about 8% lesser in efficiency. Ethanol is also an aggressive solvent and hence corrosive for materials due to its nature of absorbing moisture from the atmosphere (hygroscopic). These properties result in lower power on combustion and require the use of corrosion resistant metals, plastics and rubber materials, which tend to be expensive compared to the material used for handling regular petrol.
These rapid development in fuel policy, without proper understanding of the impacts to the majority of customers using petrol vehicles (both old and new) has created confusion in the country with no clarity from either the government or the OEMs on the impact of these fuels on vehicle performance and durability. In addition, there are contrasting opinions floating around in social media that has added to the fear and confusion amongst the users. Most of the opinions are from politicians and their followers in the media. Surprisingly the scientific and engineering community who understand the details, are the right people to provide clarity, and were instrumental in developing the fuel system and combustion engines for ethanol usage over the past two decades are silent today.
While ethanol is an essential fuel to boost energy security and reduce import bill, it’s abrupt launch without any transition options for the older vehicles that are incompatible with even E20 needs to be addressed. Then there is the question of all the vehicles, old and new, which are not designed to use E100 or Flex fuel today – where is the user base to consume E100 and Flex fuel today? There are over 290 million registered vehicles on the road today of which about 220 million are gasoline vehicles (passenger cars, two and three-wheeler). Only 85 million vehicles are BS6-II compliant and designed for E20 fuel usage.
NO VEHICLE IN INDIA TODAY, IS DESIGNED FOR E100 OR FLEX FUEL, making the recent launch of E100 and Flex fuel very premature. The withdrawal of the E10 fuel which was available till now has impacted the 135 million vehicles (about half the vehicle population) that are NOT designed for E20. This explains the consternation and recent complaints from users on lower performance and materials damage. This paper seeks to provide clarity on every concern relating to ethanol usage in Indian motor vehicles.
Ethanol has been successfully used as a motor vehicle fuel in several countries, most notably in Brazil, where they implemented E20 in 1975 and gradually moved to Flex Fuel (allowing the user to mix any ratio of ethanol and petrol based) in 2003. Today Brazil uses E100 and provides an option of E27 blend in fuel stations across the country. Vehicles designed for E100 (and hence flex fuel applications also) were launched in the 1990s and today over 90% of the vehices sold in Brazil are designed for E100/ Flex fuels.
India has to learn from the Brazil experience prior to full scale launch of flex fuel. A transition period where E10 has to be made available as an option is a must to avoid excessive vehicle repairs for half the vehicle users in the country that use older E10 compliant vehicles. This has been rightly suggested by our Chief Economic Adviser to the Government of India, Mr. V. Anantha Nageswaran, recently.
Dr. Ravi Damodaran is the Editorial Director (Tech) at Automobility Next and the host of TechNext. An IIT Roorkee alumnus with a Ph.D. in Materials Science (University of Florida), he brings over 30 years of tier-1 engineering and leadership experience from organizations including Varroc, Greaves Cotton, Delphi, and GE. For our readers, Dr. Damodaran provides an invaluable insider’s lens—translating complex mobility trends, hybrid powertrain innovations, and policy shifts through the hard realities of manufacturing and supply chain economics.
FAQs
Does E20 reduce fuel efficiency? Why?
Yes, E20 reduces fuel efficiency compared to petrol. Due to the lower calorific value of E20 (about 8% less), it generates lesser output power. For the user to get the same feel of performance, he presses the accelerator that much more on a E20 fuel, to get equivalent performance, thus increasing fuel consumption. The powertrain engineers calibrate the engine performance to reduce this effect upto a certain extent, but not fully. This is the reason they claim a 3 – 5% fuel efficiency loss in E20 vehicles.
Is E20 fuel harmful to the engine?
Under normal operating conditions the specified E20 fuel is not harmful to the engine because the combustion products are the same as that of petrol (CO2 and water vapour). E20 absorbs moisture from the environment, however water is harmless in the combustion chamber since the temperatures are so high that it is converted to water vapour as in normal petrol engines. However, the moisture in ethanol is corrosive and can reduce the life of fuel system materials in injectors, fuel pumps, fuel lines, hoses, pressure regulators, gaskets and sealants. The materials used in E20 compliant vehicles are designed to mitigate this corrosive effect of E20. But then, E20 resistant materials offer insufficient corrosion protection against flex fuel or E100, where more expensive materials have to be used in the fuel system.
Are BS6 compliant Indian vehicles capable of handling E20?
Not all of them. Most of the BS6 -I vehicles launched in India in 1 April 2020 were designed for E10 (because the target date for moving to E20 was 2030). High end vehicles in which the powertrain and fuel system were imports at that time are E20 compliant (Mercedes, BMW etc.). The BS6-II vehicles launched in 1 April 2023 and later are E20 compliant.
Can BS6-II vehicles (sold after 1 April 2023) be run on E100 or Flex fuel?
No. They will result in poor performance and reduced durability of fuel system parts. Engine damage is also a likely scenario in long term.
Can BS3, BS4 and BS6-I vehicles (sold before 1 April 2023) be run on E20
No, with the exception of some imported high-end vehicles which were E20 compliant since 2010 or later.
Will the move to flex fuel reduce the fuel import bill?
This is doubtful for a country like India which has a high density of population which requires a careful consideration of the impacts of diversion of agricultural land from food to fuel. Brazil could afford to do it as it’s population density is 25 people per square kilometre compared to India’s 445 people per sq. km. Diversion of sugarcane from producing sugar to ethanol can result in imports of sugar and the very purpose of using ethanol for fuel can be defeated.
Are there alternate methods of reducing fuel import bill today?
Yes. While BEVs offer the best alternative, there is still time to increase the penetration due to a slow uptake of BEVs. The most practical solution is the hybrid powertrains, which are 20 – 30% fuel efficient compared to conventional petrol engines, and were available in 2010 itself in India. This is better than an E20 option today and much better than the E10 option launched in 2010. The unnecessarily high taxes on hybrids (43% compared to 28% for petrol cars) is inexplicable and has cost us billions of dollars in fuel imports which could have been avoided since 2010. Even today, by bringing parity on the taxes between petrol and hybrid vehicles, the uptake of hybrids will shoot up, saving precious fuel imports. The government should allow all fuel saving and emission reduction technologies and leave the choice to the user.
Related Stories
CAFE-III: India’s new fuel rules put ethanol and batteries in the driver’s seat
The notification rewards electric cars and ethanol, and makes diesel harder to justify. Tata and Maruti look well...
Gadkari says 100% ethanol cars can cost Rs 25/litre to run, but oil companies pay Rs 71/litre for ethanol
Union Road Transport and Highways Minister Nitin Gadkari recently said that vehicles running entirely on ethanol can bring...



